Warranty And Liability; Declaration Of Conformity; Environmental Protection, Disposal - Fein KBE 36 MAGSPEED Manual

en
34
Wear detection on the magnetic foot
Moving the machine tool on the set-up surface causes
wear to the magnetic foot. This may result in air gaps
between the magnetic foot and the set-up surface and
the magnetic holding power can be reduced. For check-
ing, the magnetic foot is provided with indentations.
Check for wear each time before using the machine. If
one of these indentations is no longer fully visible, the
magnetic foot must be replaced (see page 12). Please
refer to the FEIN customer service agent under
www.fein.com.
The current spares parts list for this power tool can be
found on our website at www.fein.com.
If required, you can change the following parts your-
self:
Application tools, coolant container, coolant hose,
swarf protector

Warranty and liability.

The warranty for the product is valid in accordance
with the legal regulations in the country where it is mar-
keted. In addition, FEIN also provides a guarantee in
accordance with the FEIN manufacturer's warranty dec-
laration.
The delivery scope of your power tool may include
only a part of the accessories described or shown in this
Instruction Manual.

Declaration of conformity.

This CE declaration is only valid for European Union
and EFTA (European Free Trade Association) countries
and only for products intended for the EU or EFTA
market. After placing the product on the EU market the
UKCA mark loses its mark validity.
The UKCA declaration is only valid for the Great
Britain market (England, Wales and Scotland) and only
for products intended for the Great Britain market.
After placing the product on the Great Britain market
the CE mark loses its mark validity.
FEIN declares itself solely responsible for this product
conforming with the relevant provisions given on the
last page of this Instruction Manual.
Technical documents at:
C. & E. Fein GmbH
Hans-Fein-Straße 81
73529 Schwäbisch Gmünd-Bargau, Germany

Environmental protection, disposal.

Packaging, worn out power tools and accessories
should be sorted for environmental-friendly recycling.