Warranty And Liability; Declaration Of Conformity; Specifications - Fein WPO 13-15 E Instruction Manual

3 41 01 061 06 0.book Seite 17 Mittwoch, 12. Juli 2006 8:02 08
WPO 13-15 E / WPO 13-15 IE
Repair and customer service.
Regular cleaning.
Carry out the following steps once a week, or
more often if used frequently:
Clean the cooling air vents.
Use non-metallic tools to clean the air vents.
Blow out the interior of the power tool
from outside through the air vents with
dry, compressed air.
If required, you can change the following parts
yourself:
– Auxiliary handle (8a)
– Gear housing cover (8b)
– Application tools
For repairs, we recommend our FEIN customer
service centre, the FEIN authorised service cen-
tres and FEIN agencies. For addresses, see the
enclosed "General Safety Instructions".
When carrying out your own repairs by quali-
fied electricians we supply the repair documen-
tation upon request.
Repairs may only be carried out by quali-
fied electricians in conformity with the
valid regulations.
Please always hand this Instruction Manual
to the those carrying out the repair.
If the supply cord of this power tool is
damaged it must be replaced by a specially
prepared cord available through the FEIN cus-
tomer service centre.
Accessories.
Only use accessories recommended by
FEIN.

Warranty and liability.

The warranty for the product is valid in accord-
ance with the legal regulations in the country
where it is marketed.
In addition, FEIN also provides a guarantee in
accordance with the FEIN manufacturer's guar-
antee. For further details on this, please contact
your specialist dealer, your national FEIN repre-
sentative, or the FEIN customer service centre.

Declaration of conformity.

FEIN declares itself solely responsible for this
product conforming with the documents and
standards given on the last page of this Instruc-
tion Manual.

Specifications.

Type
Reference number
Type
Reference number
No-load speed
Power input
Output
Power supply type
Weight according to EPTA-
Procedure 01/2003
Class of protection
Polishing tool
Max. diameter
Spindle thread
EN
WPO 13-15 E
7 221 18
WPO 13-15 IE
7 221 38
200 – 1 500 rpm
1 200 W
750 W
1 ~
2.4 kg
II
250 mm
M 14
17