OBJ_BUCH-0000000243-001.book Page 19 Monday, December 14, 2015 1:12 PM
en
19
The current spare parts list for this power tool can be
found in the Internet at www.fein.com.
FMT250SL (**): For storage of the power tool, remove
the application tool and screw the clamping bolt in to the
stop.
If required, you can change the following parts yourself:
Clamping bolt (FMT250SL (**)), application tools
Warranty and liability.
The warranty for the product is valid in accordance with
the legal regulations in the country where it is marketed.
In addition, FEIN also provides a guarantee in accordance
with the FEIN manufacturer's warranty declaration.
The delivery scope of your power tool may include only
a part of the accessories described or shown in this
Instruction Manual.
Declaration of conformity.
FEIN declares itself solely responsible for this product
conforming with the relevant provisions given on the last
page of this Instruction Manual.
Technical documents at: C. & E. Fein GmbH,
C-DB_IA, D-73529 Schwäbisch Gmünd
Environmental protection, disposal.
Packaging, worn out power tools and accessories should
be sorted for environmental-friendly recycling.