Perry Electric TE542 Instructions For Installation And Use Manual

Recessed digital thermostat h 45 mm luminous touch screen display

Hide thumbs

Table Of Contents

Quick Links

Download this manual

Machine Translated by Google

RECESSED DIGITAL THERMOSTAT H 45 mm

LUMINOUS TOUCH SCREEN DISPLAY

PE - DETIPE022 10/18

Winter / Summer operation 2

temperature levels + antifreeze

Input for telephone programmer

models:

T Set

TE542

Battery powered

Mode

T Set

Mode

TE543

230V ac power supply

Instructions for installation and use

2x 1.5dc

AA -LR6

Table of Contents

Need help?

Do you have a question about the TE542 and is the answer not in the manual?

Questions and answers

Summary of Contents for Perry Electric TE542

Page 1 RECESSED DIGITAL THERMOSTAT H 45 mm LUMINOUS TOUCH SCREEN DISPLAY Winter / Summer operation 2 temperature levels + antifreeze Input for telephone programmer models: T Set TE542 2x 1.5dc Battery powered AA -LR6 Mode TE543 230V ac power supply T Set...
Page 2: Table Of Contents
Machine Translated by Google INDEX 5 - PROGRAMMABLE FUNCTIONS p. 13 1 - TECHNICAL DATA p. 3 6 - RESET OPERATION 2 - KEY TO DISPLAY AND KEY FUNCTION p. 18 p. 4 7 - POSSIBLE PROBLEMS AND SOLUTIONS 3 - INSTALLATION p.
Page 3: Technical Data
Machine Translated by Google 1 - TECHNICAL DATA Supply voltage: Alkaline type AA (LR6) battery-powered model 2 x 1,5V stylus batteries TECHNICAL DATA model at mains voltage 230V ~ 50 ÷ 60Hz about 2 years Battery model autonomy: TECHNICAL DATA Autonomy from power on on the display of the about 1 month flashing low battery symbol:...
Page 4: Key To Display And Key Function
Machine Translated by Google 2 - DISPLAY LEGEND AND KEY FUNCTIONS (touch screen) 1. Set temperature set: COMFORT or REDUCTION or ANTIFREEZE 2. Mode in (cooling) SUMMER 3. Activation of the user connected to the thermostat T Set via telephone programmer (optional) 4.
Page 5: Installation
Machine Translated by Google 3 - INSTALLATION 3.3 - INSTALLATION EXAMPLES Attention: 3.1 - OVERALL DIMENSIONS battery- before installing, switch off the mains voltage powered thermostat module Heating systems with thermostat that controls: A) Wall mounted boiler B) Burner or Circulation pump or Motorized solenoid valve C) Zone 20 14 solenoid valve NB: the examples shown...
Page 6 ONLY MODEL TE542 BATTERY POWERED (3Vdc) 3 - INSTALLATION 3.4.1 - ELECTRICAL CONNECTIONS Examples of electrical connections: ATTENTION! only for TE542 model powered by 3V dc batteries Telephone programmer contact Connection to a boiler and a for thermostat control telephone programmer...
Page 7 Machine Translated by Google ONLY MODEL TE543 230V~ POWER SUPPLY 3 - INSTALLATION 3.4.2 - ELECTRICAL CONNECTIONS ATTENTION! only for Examples of electrical connections: model TE543 mains power supply 230V~ WATER HEATER switch off the 230V ~ mains voltage Connection to a boiler and a telephone programmer template: TE543...
Page 8 Machine Translated by Google ONLY MODEL TE542 BATTERY POWER SUPPLY (3Vdc) 3 - INSTALLATION 3.5 - REMOVING AND INSERTING THE THERMOSTAT (e.g. replacing batteries, programming) Insert or replace with 2 x 1,5V AA-LR6 batteries paying attention to polarity USE GOOD...
Page 9: Instructions For Use
Machine Translated by Google IMPORTANT! 4 - INSTRUCTIONS FOR USE At the first touch on any point (marker) of the display 4.1 - OPERATING MODES touch screen the keys light up, press the keys within 5 sec The thermostat has 5 operating modes: or the related area as per the following procedure: Display Operating mode...
Page 10 Machine Translated by Google 5 - INSTRUCTIONS FOR USE 4 - INSTRUCTIONS FOR USE 4.3 - MODIFY SET TEMPERATURE T Set From current mode T Set you can edit setting the IMPORTANT! temperature T Se t acting directly The thermostat allows T Set settings from +5 ° C to 37.0 ° C on the keys: la with temperature values that satisfy the following new setting...
Page 11 Machine Translated by Google 5 - INSTRUCTIONS FOR USE 4 - INSTRUCTIONS FOR USE 4.4 - OPERATION WITH TELEPHONE PROGRAMMER T Set The telephone programmer eg. Programmer allows you to control a telephone T Set distance the thermostat by acting on the contact linked to respective terminals of the latter Contact...
Page 12 Machine Translated by Google 4 - INSTRUCTIONS FOR USE ONLY MODEL TE542 BATTERY POWER SUPPLY (3Vdc) T Set 4.5 - ALMOST LOW OR LOW BATTERIES REPORT The appearance of the flashing symbol indicates that the batteries are running out; from this moment you have about 30 days to make the replacement.
Page 13: Programmable Functions
Machine Translated by Google 5 - PROGRAMMABLE FUNCTIONS 5.1 - ACCESS TO PROGRAMMING Access to programming is recommended for the installer or expert users as changing After entering the programming menu (paragraph 5.1), the following parameters / some settings could compromise the correct operation of functions can be set and / or modified (described in the same order in the following paragraphs): the system.
Page 14 Machine Translated by Google 5 - INSTRUCTIONS FOR USE 5 - PROGRAMMABLE FUNCTIONS 5.3 - TEMPERATURE SET BLOCK 5.2 - AMBIENT TEMPERATURE CORRECTION DETECTED MAX (winter) and MIN (summer) If for any reason the thermostat is installed in a location that could influence the measured temperature (eg. In some particular cases of installation of the thermostat, e.g the perimeter wall which in winter is on average colder than the example in public buildings, hotels etc., it could be useful...
Page 15 Machine Translated by Google 5 - INSTRUCTIONS FOR USE 5 - PROGRAMMABLE FUNCTIONS 5.4 - TYPE OF TEMPERATURE REGULATION MODE The thermostat works (factory setting) in the mode THERMAL DIFFERENTIAL ON OFF / with differential value 0.5 ° C thermal (Hysteresis) prefixed at The value of the Hysteresis must be set according to the thermal inertia (settable from 0.2°C to 1.2°C).
Page 16 Machine Translated by Google 5 - INSTRUCTIONS FOR USE 5 - PROGRAMMABLE FUNCTIONS 5.5 - SELECTING THE MODE 5.6 - SETTING THE HYSTERESIS TEMPERATURE ADJUSTMENT The value of the Hysteresis for the thermal differential regulation mode (DIFFERENTIAL ON / OFF or PROPORTIONAL) must be set according to the thermal inertia of the ON / OFF () This procedure allows you to select the adjustment mode...
Page 17 Machine Translated by Google 5 - INSTRUCTIONS FOR USE 5 - PROGRAMMABLE FUNCTIONS 5.7 - PROPORTIONAL MODULATING CYCLE DURATION 5.8 - ADJUSTMENT OR EXCLUSION OF THE ANTIFREEZE PROTECTION In the operating mode the thermostat is programmed for The duration of the control cycle for operation in the mode protect the plant in case of frost when the temperature drops below MODULATING PROPORTIONAL () can be set from to 20 minutes;...
Page 18: Reset Operation
Machine Translated by Google 5 - PROGRAMMABLE FUNCTIONS 5 - INSTRUCTIONS FOR USE 6 - RESET OPERATION 5.9 - DISPLAY BACKLIGHTING: TIMED OR FIXED 6.1 - RESET The Reset operation is recommended for the installer or expert users as with this operation all the settings and programming ONLY ON TE543 MODEL previously carried out according to the type of system will be lost.
Page 19: Possible Problems And Solutions
Machine Translated by Google 7 - POSSIBLE PROBLEMS AND SOLUTIONS SOLUTION INCONVENIENCE IT CAUSES Check that the batteries are installed The thermostat display is completely off (3Vdc Batteries not inserted or batteries exhausted model) Check the polarity of the batteries Wrong battery polarity Check that the protection circuit breaker or The thermostat display is completely off (230V ac...
Page 20 Machine Translated by Google The manufacturer reserves the right to introduce all the technical and construction changes it deems necessary without prior notice...

This manual is also suitable for:

Te543