BMW K 1100 LT 1995 Rider's Manual page 23

ABS functions
The ABS is energized automatically when
the motorcycle ignition is turned "on", ob-
serving the following sequence:
®@ When the ignition has been switched on,
ABS warning lights (1) and (2) flash syn-
chronously.
mph (this will seem almost immediate).
Warning:
If you experience constant
ABS control is operational:
— when you can sense a hard resistance at
the hand- or foot-operated brake lever
during braking
Note
After the point of hard resistance, the
brake levers may possibly "give-in"
slightly, due to the equalization of fluid
volume in the system. When ABS Il is ac-
tivated, due to operator overbraking, it
"disconnects" the operator portion of
the brake system from the rest of the sys-
tem andtakes control of brake system
pressure regulation. Fluid volume equal-
ization may occur when the system shifts
back to operation control.
ABS control is not operational:
~ atspeeds below 5 km/h (unless you have
already reached 5 km/h)
— when the ignition is off