Changing Batteries; Cleaning - Becker CentronicPLUS EC548A PLUS Assembly And Operating Instructions Manual

You will find the appropriate battery type in the "Technical
data" chapter.
2
3
1
4
Only clean the device with a suitable cloth. Do not use aggressive cleaning
agents that may damage the surface.
12 - en

Changing batteries

Change the batteries within a minute and
do not press any buttons in the process. After
the batteries are inserted, the LED ring of the
transmitter indicates the current battery
charge for a short time. When the LED ring is
blue and 100% full, the battery is fully
charged and when the LED ring is 50% full,
the battery charge is half, and so on.
1. Open the cover of the battery compartment.
2. Take out the batteries.
3. Insert the new batteries correctly.
4. Close the cover on the battery compartment.

Cleaning