Changing Batteries; Cleaning; Technical Data - Becker Centronic EasyControl EC411 Assembly And Operating Instructions Manual

You will find the appropriate battery type in the "Technical
data" chapter.
2.
Only clean the device with a suitable cloth. Do not use aggressive cleaning
agents that may damage the surface.
Rated voltage
Battery type
Degree of protection
Permissible ambient temperature
Radio frequency
16 - en

Changing batteries

1.
2.
3.
1.
4.
5.

Cleaning

Technical data

Remove the control panel.
Open the battery compartment.
Take out the battery.
Insert the new battery correctly.
Close the battery compart-
ment.
3 V DC
CR 2430
IP 20
-10°C to +55°C
868.3 MHz