Display Visualizations; Manual Regeneration - Gastrodomus AV8C Installation, Operating And Maintenance Manual

DISPLAY VISUALIZATIONS

While the softener is in service, the display shows these informations:

Remaining water treated volume, at the showing moment

Water flow rate ( m3/h) at the showing moment

Time of day at the showing moment

Regeneration time
During regeneration, the display also indicates the phase that is taking place with the time remaining at the time of the
showing

MANUAL REGENERATION

You can perform a manual regeneration at any time of the service. Unlock the display by pressing and holding keys 3
and 4 for 5 seconds, then press key 2.
cod.W010771-rev.1
phase 4 : Brine refill time
phase 5 : Fast rinse time
Maximum interval regeneration days
FOR CORRECT VALVE OPERATION, LEAVE THE SET PARAMETER B-01
Renerate at the regeneration time even
though tha available volume of treated
Pag. 17
0 – 99 min.
0 – 99 min.
0 – 40 days
water does not drop to zero
05/06/2021