Display; Start-Up - Gastrodomus AV8C Installation, Operating And Maintenance Manual

DISPLAY

1 Parameters menù/confirm
2 Manual Regeneration / exit
3
4
5
6 Backwash phase 2
7 Fast rinse phase 5
8
9 Brine refill phase 4

START-UP

When commissioning the appliance it is necessary:

Open the cock supplying the softener.

Open a cock for air inside the ducts bleeds and the resins are washed. The outlet water may, for a few minutes,
be dark coloured. Leave it to run until is "cleaned", before using it.

Check for leaks from the hydraulic connections.

Connect the transformer plug to the specific socket in the rear part of the valve.

When switching on for the first time, wait that the valve goes to the service position, the display indicates "-00-"

Set the time: by pressing key 1 you enter on menù and the first parameter found is the time. To modify it, press
key 1 and choose the hour with keys 3 and 4. Press key 1 to move to the minutes, choose the correct value with
keys 3 and 4. Once finished, press key 1 to confirm, then key 2 to exit programming.
cod.W010771-rev.1
Down button
Up button
Service
Time
WARNING: when the indicator 12 lights on, the buttons are locked
For unlocked, press and hold the button 3 and 4 for 5 seconds
10 Brine e slow rinse phase 3
11
12
13
14 Water treated capacity (m^3)
15
16
17
Pag. 15
Setting
Button lock
Day
M^3/h in service
Regeneration time
Display
05/06/2021