2.3 Buttons
The control buttons provide the following functionality:
•
triggers a board reset.
•
forces alternate boot sequence.
2.3.1 Boot Order
The used boot order of the Jaguar board depends on the state of the
If no bootloader is found on any storage device, Jaguar will go into USB loader mode, showing up as a USB device with VID:PID
on the USB port P11 marked Download.
73fb79d
Page 6
Table 2.3: Default User
Username
Password
root
root
user
123123
Default
1
eMMC storage
SD card
2
SD card
USB loader
3
USB loader
switch.
pressed