(continued from previous page)
This step should take under 1 minute total.
5.3 Compile U-Boot
Note: Variables
,
,
must be already set as described in Section 5.2 Get the ATF .
Get the source code and compile the U-Boot bootloader as follows:
# Set up cross-compilation
# Download the source code
# Load u-boot config
# Build idbloader.img
# Build u-boot.dtb/u-boot.itb
# Make the resulting file available to later steps
This step should take about 1 minute total.
5.4 Compile the Linux kernel
Get the source code and compile the Linux kernel as follows:
# Set up cross-compilation
# Download the source code
(continues on next page)
73fb79d
Page 16