Buttons - Cherry theobroma JAGUAR SBC-RK3588-AMR User Manual

2.3 Buttons

The control buttons provide the following functionality:
• triggers a board reset.
• forces alternate boot sequence.
2.3.1 Boot Order
The used boot order of the Jaguar board depends on the state of the
If no bootloader is found on any storage device, Jaguar will go into USB loader mode, showing up as a USB device with VID:PID
on the USB port P11 marked Download.
Once booted into Linux, presses on the
v1.0
Page 6
Boot Reset
SW2 SW1
Fig. 2.4: Buttons and Download USB Type-C port
Default
1 eMMC storage SD card
2 SD card USB loader
3 USB loader
button will trigger a
input device:
USB 3.1
P11
switch.
pressed
input event on the
(continues on next page)