# Make the resulting files available to later steps
This step should take about 1 minute total.
6.2.2 Enter USB flashing mode
Connect a USB-C cable between the
download) and a USB port of your host PC.
Make sure there is no SD card inserted into the board.
Push the
button (see
Push the
button and release the
The
command on your host PC should return the following:
6.2.3 Flash the eMMC
To write the image file path stored in the variable
This step should take about 1 minute for the Debian image.
JAGUAR SBC-RK3588 User Manual
© Theobroma Systems Design und Consulting GmbH
(see
fig-buttons-usb-download).
button.
to the on-board eMMC, run:
(continued from previous page)
fig-buttons-usb-
73fb79d
Page 19