Table of Contents
Advertisement
6 Deploy a disk image
This chapter describes how to write a disk image of the Debian 12 bookworm variant as generated in the previous chapter.
Note: The variable
Warning: Avoid having the disk image on both the SD Card and the internal eMMC of the module.
As the Linux kernel on the module uses
whether the SD Card or the internal eMMC is used.
6.1 Deploy on SD Card
Insert an SD card into the host PC and check
Then, run this command, replacing
6.2 Deploy on internal eMMC
6.2.1 Compile rkdeveloptool
To write the image directly onto the on-board eMMC, the flashing tool rkdeveloptool is used, and it must be compiled on the
host PC:
# Install compile dependencies
# Download rkdeveloptool source code
# Compile rkdeveloptool
# Download miniloaders used for flashing
# Build miniloader binaries
# Tag linux-5.10-gen-rkr4.1
73fb79d
Page 18
must be already set as described in respective chapter.
and
to find out the device name that was used.
with the real device name:
to identify partitions to mount, it will be unpredictable
(continues on next page)
Advertisement
Table of Contents
