5.3 Compile U-Boot
Note: The variable
must be already set as described in Section 5.2 Compile the ATF .
Get the source code and compile the U-Boot bootloader as follows:
This step should take about 1 minute total.
5.4 Compile the Linux kernel
Get the source code and compile the Linux kernel as follows:
The time required for this step heavily depends on your internet connection and CPU power. On a quad-core 2.9GHz machine
with an 1Gb/s internet connection, it takes about 20 minutes total.
5.5 Building the debos image
Note: The variables
and
must be already set as described in Section 5.3
Compile U-Boot and Section 5.4 Compile the Linux kernel, respectively.
Get the source code for the debos recipe and build the image as follows:
(continues on next page)
PX30-uQ7 User Manual
v1.0.1-8-g2dd91c8
© Theobroma Systems Design und Consulting GmbH
Page 21