Compile U-Boot - Cherry theobroma JAGUAR SBC-RK3588-AMR User Manual

(continued from previous page)
# Make the baudrate match our U-Boot
' '
This step should take under 1 minute total.

5.3 Compile U-Boot

Note: Variables , , must be already set as described in Section 5.2 Get the ATF .
Get the source code and compile the U-Boot bootloader as follows:
# Set up cross-compilation
# Download the source code
# Load u-boot config
# Build idbloader.img
# Build u-boot.dtb/u-boot.itb
# Make the resulting file available to later steps
This step should take about 1 minute total.
v1.0
Page 16