RACCEWAY e-city 21 User Manual page 14

DESCRIPTION OF REMOTE CONTROL WITH ALARM
[tJ
2x press in a row
you start the e-
scooter, you don't
need an ignition
key
Deactivation of the alarm
Ci]
and remote start
ELECTRIC SCOOTER OPERATING CONDITIONS
The control system consists of four main components:
-Battery
-Control unit
-Gas
-Engine
By turning the throttle handle, a signal is sent to the control unit
corresponding to the angle of rotation of the throttle handle. The
control unit then draws current from the battery depending on
the activity we are doing (starting, driving on the flat/uphill, high/
low speed, etc.)
The main switch under the seat acts as high voltage protection.
The 72V DC to 12V DC converter inverts the voltage to 12V.
All bulbs work on 12V.
The alarm works on 72V, it is sensitive to vibrations.
Despite the very low energy consumption, we recommend
turning off the main switch if the scooter is not operated for a
long period of time..
Alarm activation.
13
Search, �
start the siren
for 5 seconds.
Ci]
Hlavní vypínač
Motor