TRENDnet TI-BG62i User Manual page 45

TRENDnet User's Guide
VLAN IDs: None
Web Configuration
System > PTP > General Settings
Parameter Description
PTP State Enables / Disables the global PTP state.
Domain ID Creates / Removes a Domain.
Primary Domain Configure the primary domain.
PTP Status
PTP Status The current global PTP state.
PTP Primary
The primary domain.
Domain
Domain Settings
System > PTP > Domain Settings
© Copyright 2023 TRENDnet. All Rights Reserved.
Parameter Description
Domain ID Creates / Removes a Domain.
Path Trace The current path track mode of the domain.
Slave The current slave mode of the domain.
Two Step Clock The current Two Step clock mode of the domain.
Configures a priority for PTP domain dataset's 1st priority. The
Clock Priority_1
default priority value is 128.
Configures a priority for PTP domain dataset's 2nd priority. The
Clock Priority_2
default priority value is 128.
Ordinary Clock - Switch communicates with the network by using
specified single port. It will be same as grand master clock.
Boundary Clock - Switch can use multiple ports to communicate
with network and each port behaves as ordinary clock. Port is
Clock selected as either master or member based on its local clock and
data sets. Transparent Clock - It forwards all received PTP
messages and measures and accumulate delay timers in
correction field. Forward Clock - It forward all received PTP
messages in domain ports.
TI-BG62i
43