TRENDnet User's Guide
Product Overview
TI-BG62i
IP30 Rated
Housing
PoE LEDs
PoE+ + Gigabit
RJ-45 ports
SFP Slots
•
PoE++ Ports 1-4 – Connect either network PoE++ or non-PoE devices.
•
SFP Slot 5-6 – Designed to operate at Gigabit or 100Mbps speeds.
•
Reset Button – Push the button for 5-10 seconds and release to reset.
•
Grounding point/screw – The switch chassis can also be connected to a known
ground point for additional safety and protection. (grounding wire not
included)
© Copyright 2023 TRENDnet. All Rights Reserved.
Front View
LED Indicators
10/100/1000
Mbps per port
LED indicator
LINK/ACT per
port LED
indicator
4-pin terminal
block
DIP Switches
Reboot Button
*Please note power supply is sold separately*
**Supported power supplies: TI-S12024 (120W), TI-S24048 (240W), TI-S48048 (480W).
Lower wattage power supplies may be used but may result in decreased PoE power
TI-BG62i
Top View
Ground point
6-pin terminal
block (PWR,
RPS, ALM)
DIP switch
definition
budget**
2