Table of Contents
Advertisement
TRENDnet User's Guide
[DEVICE_NAME](config)#snmp system-location Branch-Office
Web Configuration
System > SNMP > Settings
Parameter
Description
Select Enable to activate SNMP on the Switch.
SNMP State
Select Disable to not use SNMP on the Switch.
Type
a
System Name
(The System Name is same as the host name)
System Location
Type a System Location for the Switch.
System Contact
Type a System Contact for the Switch.
Apply
Click Apply to configure the settings.
Refresh
Click this button to reset the fields to the last setting.
View Settings
System > SNMP > View
The SNMP View table specifies the MIB object access criteria for each View Name. If the
View Name is not specified on this page, then it has access to all MIB objects. You can
specify specific areas of the MIB that can be accessed or denied based on the entries in
this table. You can create and delete entries in the View table.
© Copyright 2023 TRENDnet. All Rights Reserved.
System
Name
for
the
View Name
View Subtree
View Type
Apply
Refresh
Switch.
Group
System > SNMP > Group
The SNMP View Names are defined in the SNMP Group Access table and are based on
the User and Group Names
Parameter
This entry must be pre-defined on the SNMP User/Group page.
Input the subtree OID
Select Included or Excluded as the view type
Click Apply to configure the settings.
Click this button to reset the fields to the last setting.
Description
TI-BG62i
22
Advertisement
Table of Contents
