Configuring Auto Storage - GE MAC 600 Operator's Manual

Configuring Auto Storage

Perform the following procedure to configure the device to auto save an acquired ECG in xml
format.
1.
Within the system setup function, select Storage.
2.
In Auto ECG Storage, select the type of stored ECGs.
3.
Select the storage format.
4.
In Store XML format, select Yes to store ECG in XML format.
5.
Select Return.
Perform the following procedure to auto save an ECG in PDF format, after you configured the
device to auto save an acquired ECG in xml format.
1.
Within the System Setup function, select PDF Configuration.
2.
In Store PDF Format, select Yes.
3.
Select Yes to enable the grid lines to appear in the PDF.
4.
Select the report format for the ECG.
2047426-001K MAC™ 600
Acquiring an ECG
71