GE MAC 600 Operator's Manual page 76

6.
Press the ECG key to begin the acquisition.
A message indicating that the data is being acquired is displayed on the screen. When
the acquisition is complete, one of two things will occur, depending on the Preview before
print setting in Setup > ECG > ECG Analysis.
l
l
7.
While viewing the preview, do one of the following:
l
l
l
l
8.
Use the menu options to print a copy, to store the data, or to move on to the next patient.
For a description of each option, see
2047426-001K
If Preview before print is enabled, a preview of the 10 second ECG is shown on the display.
Proceed to step 7.
If Preview before print is not enabled, the ECG data will be analyzed and printed after it
has been acquired. Skip to step 8.
To accept the reading press F1 (Continue).
To toggle between the following displays, press F2 (Analysis/Rhythm).
the analysis/measurement of the acquired ECG
n
the waveform of the acquired ECG
n
To store the current ECG report on the SD card, press F3 (Store). Press F1 to continue.
To exit the preview screen, press F1 (Continue) or F4 (Cancel).
To discard the reading and begin over, press F4 (Cancel) and repeat from step 4.
NOTE:
If the system is configures to auto store and auto transmit the acquired ECG, pressing
Cancel will cancel the storage and transmission.
"ECG Options – After Acquiring an ECG" on page
MAC™ 600
Acquiring an ECG
68.
63