Table of Contents
Advertisement
(1)
POINT
• Failure to securely lock the module joint levers until they click may
cause malfunction, failure, or drop of the module.
• To slide the levers, use the projection of the lever. Sliding levers with
other parts than the projection may cause a difficulty of sliding.
• The metal parts of a module (such as the back side) may be heated
to a high temperature immediately after the power is turned off.
Therefore, be careful not to burn yourself when disconnecting a
module.
5. Slide the levers toward the back side
of the module until they click.
Make sure that the modules are
securely connected.
To lock the levers, push the projection
(1) of the lever.
37
Advertisement
Table of Contents
