Replace The Shrouds - Schwinn 490e Service Manual

Elliptical

Table of Contents

™

NOTICE: This document provides instructions for the replacement of the Shrouds on the Schwinn

If you need assistance, please contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased outside

US/Canada). To find your local distributor, go to: www.nautilusinternational.com

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Read and understand all Warnings on this machine.

Nautilus, Inc., www.nautilus.com, 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. - Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S.

protected by common law in the United States and other nations. | ORIGINAL DOCUMENT - ENGLISH VERSION ONLY

Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Read and understand all Warnings on this machine.

• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and

safety warnings could cause injury to the service technician or bystanders.

• Keep bystanders and children away from the product being serviced at all times.

• Disconnect all power to the machine before you service it.

• Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.

• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do

maintenance steps involving these components. Do not try to do heavy or awkward steps on your own.

•

Use only replacement parts and hardware that are supplied or approved by Nautilus. Failure to use Nautilus-approved

replacement parts can adversely affect the safety and functionality of the equipment creating a risk to users and will void the

warranty.

•

Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when

doing maintenance or replacing components. If at any time the Warning labels become loose, unreadable or dislodged,

replace the labels. If purchased in US/Canada, contact Customer Service for replacement labels. If purchased outside US/

Canada, contact your local distributor for them.

• Do not try to change the design or functionality of the machine being serviced as this can adversely affect user safety.

• Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested

for correct performance.

SAVE THESE INSTRUCTIONS

•

Tools Required (not included)

#2 Phillips screwdriver

Standard screwdriver

Crank puller