Siemens HB214AB 0 Series Instruction Manual page 17

Lift out the outer panel (fig.
4.
carefully on a flat surface.
Lift out the inner panel (fig.
5.
carefully on a flat surface.
If necessary, you can remove the condensate trough
6.
for cleaning. To do this, open the appliance door
fully (fig. ).
%
Tilt the condensate trough up and remove it (fig.
7.
Clean the panels with glass cleaner and a soft cloth.
Wipe the condensate trough with a cloth and some hot
soapy water.
:
Warning
Risk of injury!
Scratched glass in the appliance door may develop
■
into a crack. Do not use a glass scraper, sharp or
abrasive cleaning aids or detergents.
The hinges on the appliance door move when
Risk of injury!
■
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Fitting panels
Open the appliance door fully and refit the
1.
condensate trough. To do this, insert the trough from
above and rotate it at the bottom (fig.
) and set it down
#
) and set it down
$
&
).
!
Slide each inner panel back in and make sure that it
2.
is sitting correctly at the bottom in the retainer
(fig. ).
"
Push the inner panel in at the top (fig.
3.
).
Slide the outer panel back in and make sure that it is
4.
sitting correctly at the bottom in the retainer (fig.
Push the outer panel in at the top (fig.
5.
Appliance door
en
).
#
).
$
).
%
17