Yamato VE2700-8 class Instruction Manual page 9

SAFETY INSTRUCTIONS
5. Safety devices and warning label affixing locations
Belt cover, belt cover (small)
The belt cover prevents entanglement with the belt.
Do not operate with the cover is removed.
Front cover, side cover, cylinder upper cover, needle
bar guard
These covers prevents contact with the moving parts inside
the covers.
Do not operate with these covers opened or removed.
Eye guard
The eye guard prevents injury to the operator' s eyes due to
breaking of needles during the sewing operation. This section
also houses the needle thread take-up, upper knife, and
other moving parts.
Do not operate with the eye guard opened.
Needle bar guard
Needle thread
take-up guard
Side cover
Finger guard
vi
Front cover
Eye guard
Cylinder upper cover
Finger guard
The finger guard prevents the operator' s fingers from going
under the needle. However, there is some space at the top of
the finger guard and other sections, and so there is a risk of
finger insertion.
Do not operate when the finger guard is removed.
Needle thread take-up guard
The needle thread take-up guard prevents contact with the
moving parts as the needle thread take-up. but it dose not
completly cover the moving parts.
Do not operate when the needle thread take-up guard is
removed.
Safety label, warning label
Reaffix the labels if they start peeling off or become dirty and
illegible.
Belt cover (small)
Safety label
Rotating direction
symbol
Belt cover