Table of Contents
Advertisement
U-11
Schedule setting (continued)
Check box
Radio button
Program number selection
When the cursor is in any of the check boxes showing the program numbers 1 to 7 on the left side of the screen, press the UP (
or DOWN (
) button to move the cursor up or down to select the program number you want to set.
To enable the selected program number, press the SET button to place a checkmark in the check box. To disable it, clear the
checkmark.
Schedule setting of each program
When the cursor is in any of the check boxes, pressing the PLUS (+) button moves the cursor into the white frame on the right.
When the cursor is at any of the items within the white frame, pressing the PLUS (+) button moves the cursor to the right, and MINUS (-)
button to the left.
You can set the power-on/off time and video input by pressing the UP (
deselect the radio buttons by pressing the SET button.
ON:
Set the time when the power is turned on. If you don't want to set the power-on time, enter "--."
OFF:
Set the time when the power is turned off. If you don't want to set to the power-off time, enter "--."
INPUT:
Displays the video input selected when the power is turned on. If you want to select the video input that was
selected before the power is turned on, enter "--." When you set the ON time and the video input, you can
switch the video input alone.
EVERY DAY:
Select this option to execute the schedule every day. When you select EVERY DAY, you cannot select any days
of the week and EVERY WEEK.
MON - SUN:
Select the days of the week on which you want to execute the schedule. Unless you select EVERY WEEK, too,
the selection of the days of the week is cleared after the schedule is executed one time.
EVERY WEEK:
Select this option to execute the schedule on the selected days of the week, every week.
Schedule confi rmation
To confi rm the schedule, press the MENU button on the wireless remote control or the EXIT button on the rear of the monitor to exit
the SCHEDULE menu of the OSD screen function.
If you turn off the power before exiting the SCHEDULE menu, the schedule settings may be canceled.
NOTE:
•
Before making the schedule settings, be sure to check the current date and time using "DATE AND TIME."
•
When you close the SCHEDULE screen, the settings are saved.
•
When two or more schedules are enabled, they are executed in descending order of the program number, and the power is
turned off upon completion of the last executed schedule.
•
When there are two or more schedules having the same power-on/off time, the one having the largest program number is
executed.
•
You cannot set the power-on time and the power-off time to the same time.
•
When OFF TIMER is ON, the schedule settings are ignored.
•
When the main power switch or AC power supply turns off or the circuit breaker trips due to power failure or other causes, the
schedule programs you set aren't executed.
How to set up schedule
English-38
) or DOWN (
) button. In addition, you can select or
Carry out as necessary
)
Advertisement
Table of Contents
