Table of Contents
Advertisement
Parts Name and Functions (continued)
Main Power Switch
Anti-theft lock slot
You can insert a
Kensington anti-theft
lock key.
AC IN (3-pin, with earth terminal)
1
Connects with the supplied power cord.
2
REMOTE connector
IN connector:
Connects with the IR sensor supplied with the remote control
kit (option). The light sensing position can be moved within the
length of the IR sensor cable. Or connects with the REMOTE
OUT connector of other connected LM55S1 (W).
OUT connector:
Connects with the REMOTE IN connector of other connected
LM55S1 (W).
NOTE:
When the IR sensor supplied with the remote control kit (option)
is connected, the remote control sensor on the monitor does
not operate.
Do not confi gure a multi-connection using REMOTE IN/OUT
and RS-232C IN/OUT at the same time.
RS-232C connector (D-SUB 9-pin)
3
IN connector:
Connects with the RS-232C OUT connector of a computer or
other connected LM55S1 (W).
OUT connector:
Connects with the RS-232C IN connector of other connected
LM55S1 (W).
LAN connector
4
Connects with a LAN cord.
HDMI IN
5
Connects with the digital video output of a computer, DVD
player, etc.
DISPLAYPORT IN
6
Connects with the digital video output of a computer, etc.
DVI-D IN
7
Connects with the digital video output of a computer, etc.
8
DVI-D OUT
Outputs the signal that is supplied to the DVI-D IN connector (
Connectors and Terminals
Rear
IN OUT IN
OUT
9
Connects with the analog video output of a computer, etc.
10
Connects with the audio output connector of external
equipment such as a computer, VCR, and DVD player.
(a) AUDIO IN1: ø3.5 mm Stereo-mini jack connector
(b) AUDIO IN2: RCA connector
11
To use the component video output of video devices such as a
DVD player, connect to the YPbPr IN connector.
To use the composite video output of video devices such as a
camera, connect to the Y connector of YPbPr.
Switch the component signal [YPbPr] and composite signal
[VIDEO] by the monitor buttons or remote control (option).
12
Switches the built-in speakers and external speakers
(commercially available).
13
Outputs the signal that is supplied to the AUDIO IN connector
(
). Even when HDMI or DISPLAYPORT is selected, the
10
selected audio is output from the AUDIO OUT connector.
Connects with an external audio amplifi er, etc.
NOTE:
Headphones and earphones aren't supported.
14
Connects with external speakers (commercially available).
15
Insert an expansion module (option or commercially available)
in this slot.
CAUTION:
Damage to the product may result or monitor may not function
properly if an incompatible device is installed in this slot. See
page 23.
When mounting an OPS-compliant computer (commercially
available), turn on the cooling fan.
).
7
English-9
Pr Pb Y
D-SUB IN
AUDIO IN
YPbPr/VIDEO IN
Speaker switch
AUDIO OUT
EXTERNAL SPEAKER TERMINAL
Option slot
Left side
Advertisement
Table of Contents
