Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for EnerSys PowerSafe SBS XC+
Summary of Contents for EnerSys PowerSafe SBS XC+
- Page 1 Operation Guide for Renewable Energy Applications Visit us at www.enersys.com...
- Page 2 Batteries should be stored in a cool, dry area. Note that high 1. Introduction temperature increases the rate of self-discharge and reduces XC + range of valve regulated The EnerSys PowerSafe ® ® ® storage life. The following table gives the maximum storage lead acid cells and monoblocs is designed to meet today’s...
- Page 3 5.1. Operating Temperature However, inaccuracies associated with equipment calibration The recommended operating temperature range for optimum and/or controller algorithm accuracy can lead to drift in life and performance is between 20°C to 25°C. However, determining the true state of charge (SoC), meaning that PowerSafe SBS XC + cells and monoblocs can be operated in periodic equalisation charge and recalibration of SoC is required.
- Page 4 If the ambient temperature deviates from 25°C, a correction factor must be applied to the published rating to optimise the 3,600 service life. See Figure 4 below for 20-hour discharges as a typical example. please contact your EnerSys representative ® 6. Maintenance for alternative discharge rates.
- Page 5 7. Data Recording It is recommended that, as a minimum, the following information is recorded by means of regular data logging, which the user must make available to EnerSys to validate any ® warranty claim. 1) Records of the commission charge.
- Page 6 PA 19605, USA 6300 Zug Singapore 189721 Tel: +1-610-208-1991 / Switzerland Tel: +65 6416 4800 +1-800-538-3627 ©2023 EnerSys. All rights reserved. Trademarks and logos are the property of EnerSys and its affiliates unless otherwise noted. Subject to revisions without prior notice. E.&O.E.
Need help?
Do you have a question about the PowerSafe SBS XC+ and is the answer not in the manual?
Questions and answers