Led Indications - Toshiba 42LZ196 Operating Manual

LED indications

The blue and red LED lights on the TV front indicate the TV's status, as described below:
Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the red
LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction.
TV front
LED Indication
1) Blue is ON (solid).
2) Red is ON (solid).
3) Red blinks three
times.
4) Blue blinks.
Red blinks.
5) Blue is on (solid).
Red blinks.
6) Blue blinks slowly.
7) Blue blinks quickly.
If, after trying the solution, the problem still exists:
In the U.S., call TACP Consumer Solutions at 1-800-631-3811.
•
In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to www.toshiba.ca; click
•
"Home Entertainment," and then click "Support."
86
Chapter 8: Troubleshooting
Red LED Blue LED
Condition
The TV is operating properly.
Recording is in progress.
The TV is rebooting.
Fan stopped (SET).
Fan stopped (CableCard).
Abnormal operation of BUS line.
Power protect detection.
Solution
–
–
Wait several seconds until the red LED stops
blinking.
Turn OFF the TV and unplug the power cord.
Plug the power cord in again and turn ON the TV.