Manually Setting Up The Network Address - Toshiba 42LZ196 Operating Manual

9
If, after repeating steps 1–6, you receive the error
message shown in step 8:
Either...
a) Highlight "OK" and press T.
b) Go to "Manually setting up the network address."
Or...
a) Highlight "OK" and press T.
b) Continue to sections C, D, and E (- pages 63–67)
(to set up and use file sharing) and/or to sections F, G,
H, and I (- pages 75–81) (to set up and use personal
e-mail and e-mail scheduling).
If the file sharing and/or personal e-mail and e-mail
scheduling features work correctly, then the
automatic network address setup was successful (even
though the TV displayed the error message).

Manually setting up the network address

This setup requires the data listed below. You can get this
data from either your ISP or the configuration utility for
your DSL/cable modem or router.
IP address:
___ ___ ___ . ___ ___ ___ . ___ ___ ___ . ___ ___ ___
Subnet mask:
___ ___ ___ . ___ ___ ___ . ___ ___ ___ . ___ ___ ___
Gateway (Router) address:
___ ___ ___ . ___ ___ ___ . ___ ___ ___ . ___ ___ ___
DNS (Domain Name Server) address:
___ ___ ___ . ___ ___ ___ . ___ ___ ___ . ___ ___ ___
Press Y and open the Setup menu.
1
Highlight Installation and press T. The Installation
2
menu appears.
3
Open the Network menu.
Highlight Basic Network Setup and press T.
4
5
The message "Obtain network address automatically?"
appears.
Highlight No and press T.
Basic Network Setup
Obtain network address automatically?
Yes
6
The Basic Network Setup menu appears.
Press B or b to highlight the IP Address field, and then
use the Number buttons on the remote control to input the
IP address.
Basic Network Setup
Please enter your Network Address Information
IP Address
Subnet Mask
Gateway (Router)
DNS (Domain Name Saver)
Cancel
7
Press b to highlight the Subnet Mask field, and then use
the Number buttons to input the Subnet Mask.
62
Chapter 7: Using the THINC
No
0 0 0 0
225 225 225 0
0 0 0 0
0 0 0 0
Done
™ home network feature
8
Press b to highlight the Gateway (Router) field, and
then use the Number buttons to input the Gateway
(Router) address.
9
Press b to highlight the DNS (Domain Name Server)
field, and then use the Number buttons to input the DNS
address.
When finished, highlight Done and press T.
10
The Basic Network Setup menu closes and the
Network menu appears.
11
Go to section C, "Setting up file sharing on your PC."