Led Indications - Toshiba 46XV733 Service Manual

3. Insert the USB device carrying the copied settings, and press OK to copy settings to the
TV.
4. After the copy is completed successfully, the message is shown and the set reboots
automatically.
5. Remove the USB device.
6. If the copy is not completed, an error message is shown and the set does not reboot.
Repeat from step-a again, or repeat the steps of saving from TV to USB device.

LED Indications

The LEDs on the TV (at the bottom of the TV) indicate the TV's status, as described below.
There are 3 LEDS (from left to right): PowerOn/Standby, OnTimer, ProgramTimer.
PowerOn/Standby LED
Red ON (solid) = The TV power cord is plugged in, but TV is in Standby.
Green ON (solid) = The TV is turned on.
OnTimer LED
Green ON (solid) = The OnTimer is set.
ProgrammeTimer LED
Orange ON (solid) = The On timer is set.
Red ON (solid) = Programme Timer recording is operating.