Table of Contents
Advertisement
OPT8
D7 (bit7)
Hotel Mode RS232C
D6 (bit6) ~
D4 (bit4)
D3 (bit3)
RF tuning operation by position up/down on
remote or front panel of the TV set, number,
and previous key when HDMI or PC input
D2 (bit2)
Enable mode that picture mode will be set in
forced when turning the main power ON
D1 (bit1) ~
Forced picture mode
D0 (bit0)
LED Indications
The LEDs on the TV (at the bottom of the TV) indicate the TV's status, as described below.
There are 3 LEDS (from left to right): PowerOn/Standby, OnTimer, ProgramTimer.
PowerOn/Standby LED
Red ON (solid) = The TV power cord is plugged in, but TV is in Standby.
Green ON (solid) = The TV is powered on.
OnTimer LED
Green ON (solid) = The OnTimer is set.
ProgrammeTimer LED
Orange ON (solid) = The On timer is set.
Red ON (solid) = The On timer is operating.
LED Indication
FUNCTION DESCRIPTION
No use
Condition
1
0 (Normal)
Enable
Disable
-
Disable
Enable
Enable
Disable
(Display
language only)
0 [dec]: Auto View (Normal)
1 [dec]: Dynamic
2 [dec]: Standard
3 [dec]: Movie
Solution
-
Advertisement
Table of Contents
