Advertisement
5. After copy is completed successfully and the message is shown, remove the USB
device.
Loading the Hotel Mode Settings from USB device to TV
1. Enter Hotel Clone menu as shown in previous section.
2. Select "USB to TV" by pressing or buttons.
3. Insert the USB device carrying the copied settings, and press OK to copy settings to the
TV.
4. After the copy is completed successfully, the message is shown and the set reboots
automatically.
5. Remove the USB device.
6. If the copy is not completed, an error message is shown and the set does not reboot.
Repeat from step-a again, or repeat the steps of saving from TV to USB device.
LED Indications
The LEDs on the TV (at the bottom of the TV) indicate the TV's status, as described below.
There are 3 LEDS (from left to right): PowerOn/Standby, OnTimer, ProgramTimer.
PowerOn/Standby LED
Red ON (solid) = The TV power cord is plugged in, but TV is in Standby.
Advertisement
