Connecting The Rd-101; The Rear Panel - Vitus Audio Reference Series Owner's Manual

2. CONNECTING

Connecting the RD-101

Digital inputs Digital inputs
Input USB B
WI-FI USB A
Ethernet RJ45
Input S/PDIF
Input AES
Power
Outputs
Ground / Earth
Output RCA
Output XLR
12 | RD-101 Owner's manual

The rear panel

Place the RD-101 on its shelf.
Connect all the sources to the
inputs of the RD-101 labelled
INPUT 1 to 5 on the rear panel.
Connect the output of the
RD-101
Lastly connect the mains to
the DAC, after you have
connected both inputs and
outputs.
ATTENTION: Never plug in/
unplug any cables within the
whole of the system while the
RD-101 is operational. Always
set the RD-101 into standby
mode before making any system
adjustments.
USB B in
WI-FI dongle in
Ethernet in
RCA
3 pin XLR
C13/C15 IEC
Ground
RCA
3 pin XLR
2. CONNECTING
Fuse
RD-101 Owner's manual | 13