Replacing A Blown Fuse - Vitus Audio Reference Series Owner's Manual

4. OPERATION AND SERVICE

Replacing a blown fuse

REMOVE THE POWER CABLE
1.
The fuse carrier is placed on the back of the external
power supply under the power connector.
3.
Pull the fuse carrier out.
Blown fuse
Spare fuse
5.
There is a spare fuse available in the fuse carrier.
24 | RD-101 Owner's manual
2.
Loosen the fuse carrier using a flat object like a flat screwdriver.
4.
Pull the fuse carrier out.
6.
Take the blown fuse out of the fuse carrier
and throw it away.
Replacing a blown fuse
7.
Push the spare fuse out using a pointy object.
8.
10.
The fuse carrier is in place when you hear "CLICK".
4. OPERATION AND SERVICE
7.
Place the spare fuse in the fuse carrier and click the fuse
in place.
9.
Push the fuse carrier into the back.
RD-101 Owner's manual | 25