Table of Contents
Advertisement
7. EXAMPLES OF OPERATION
30 | RD-101 Owner's manual
Changing offset volume for inputs
INPUT
MENU
SELECT
STANDBY
EXAMPLE 1
Changing offset volume for inputs
A specific volume offset on the RD-101 can be set on each individual
input, to accomodate for different output levels of different sources.
This can be used to reduce the difference in output level, when
switching between inputs.
The offset value can be set from -12dB to +12dB.
Press the "MENU" button to enter menu mode.
Use the function buttons on the front of the unit to navigate to
SETUP - INPUTS and select the desired input.
1. r
Scroll forwards in the menu.
2. MENU/SELECT
Enter and exit submenus and select settings.
3. s
Scroll backwards in the menu.
Enter the OFFSET menu and navigate up or down in the offset steps
by utilising the function buttons until the desired offset is shown in
the display. Then press select and navigate to the exit menu point
and press select again.
The new offset setting has now been saved on the chosen input.
7. EXAMPLES OF OPERATION
MUTE
YOU PRESS
YOU SEE
Line 1
MENU
< EXIT
SETUP >
SELECT
< BACK
INPUTS >
SELECT
< BACK
Streamer >
USB >
INPUT 2 >
SELECT
< BACK
< EXIT
FIXED >
OFFSET >
SELECT
0.0 dB
6.0 dB
SELECT
OFFSET >
FIXED >
< EXIT
SELECT
Line 1
RD-101 Owner's manual | 31
Advertisement
Table of Contents
