Table of Contents
Advertisement
7. EXAMPLES OF OPERATION
Changing display brightness
INPUT
MENU
SELECT
STANDBY
EXAMPLE 2
Changing display brightness
The display on RD-101 can be set to different brightness levels
according to your preference.
Press the "MENU" button to enter menu mode.
Use the function buttons on the front of the unit to navigate
to SETUP - BRIGHT.
1. r
Scroll forwards in the menu.
2. MENU/SELECT
Enter and exit submenus and select settings.
3. s
Scroll backwards in the menu.
Enter the BRIGHT menu and navigate up or down in the brightness
steps by utilising the function buttons until the desired brightness
is shown in the display. Then press select and navigate to the exit
menu point and press select again.
The new brightness setting has now been saved.
32 | RD-101 Owner's manual
MUTE
YOU PRESS
YOU SEE
Line 1
MENU
< EXIT
SETUP >
SELECT
< BACK
INPUTS >
BRIGHT >
SELECT
BRIGHT 1
BRIGHT 2
SELECT
BRIGHT >
INPUTS >
< BACK
< EXIT
SELECT
Line 1
Changing initial volume step
INPUT
MENU
SELECT
STANDBY
EXAMPLE 3
Changing initial volume step
You can set the volume step that the RD-101 will initialise on,
every time it is taken out of standby mode.
Press the "MENU" button to enter menu mode.
Use the function buttons on the front of the unit to navigate
to SETUP - V.INIT.
1. r
Scroll forwards in the menu.
2. MENU/SELECT
Enter and exit submenus and select settings.
3. s
Scroll backwards in the menu.
Enter the V.INIT menu and navigate up or down in the volume steps
by utilising the function buttons until -35dB is shown in the display.
Then press select and navigate to the exit menu point and press
select again.
Next time you turn on the RD-101, it will initialise on volume
step -35dB.
7. EXAMPLES OF OPERATION
MUTE
YOU PRESS
YOU SEE
Line 1
MENU
< EXIT
SETUP >
SELECT
< BACK
INPUTS >
BRIGHT >
LOGO >
V.INIT >
SELECT
-40.0 dB
-35.0 dB
SELECT
V.INIT >
LOGO >
BRIGHT >
INPUTS >
< BACK
< EXIT
SELECT
Line 1
RD-101 Owner's manual | 33
Advertisement
Table of Contents
