Table of Contents
Advertisement
7. EXAMPLES OF OPERATION
Setting fixed volume for inputs
INPUT
MENU
SELECT
STANDBY
EXAMPLE 6
Setting fixed volume for inputs
Each individual input on the RD-101 can be set to a fixed volume
in the menu. The input is then locked to the set volume step and
can no longer be adjusted.
This function is used as the "home theater bypass" function,
if you have a surround processor that controls the volume.
Press the "MENU" button to enter menu mode.
Use the function buttons on the front of the unit to navigate
to SETUP - INPUTS and select the desired input.
1. r
Scroll forwards in the menu.
2. MENU/SELECT
Enter and exit submenus and select settings.
3. s
Scroll backwards in the menu.
Select FIXED - SET FIX and use the function buttons to set the fix
to FIX ON, press select. Then select the ADJUST menu point and
use the function buttons to navigate to the desired volume step.
Press select and navigate to the exit menu point and press select again.
The input has now been set to a fixed volume step and can no longer
be adjusted.
The fix can always be turned off by repeating the steps above and set
the fix to FIX OFF.
36 | RD-101 Owner's manual
MUTE
YOU PRESS
YOU SEE
Line 1
MENU
< EXIT
SETUP >
SELECT
< BACK
INPUTS >
SELECT
< BACK
INPUT1 >
SELECT
< BACK
< EXIT
FIXED >
SELECT
< BACK
SET FIX >
SELECT
FIX OFF
FIX ON
SELECT
SET FIX >
ADJUST >
SELECT
-40 dB
0.0 dB
SELECT
ADJUST >
< EXIT
SELECT
Line 1
Configuring auto standby
INPUT
MENU
SELECT
STANDBY
EXAMPLE 7
Configuring auto standby
The RD-101 can be configured to automatically go into standby after
a set time period, after no buttons on the remote or front of the unit
having been pressed. Press the "MENU" button to enter menu mode.
Use the function buttons on the front of the unit to navigate to
SETUP - AutoStb.
1. r
Scroll forwards in the menu.
2. MENU/SELECT
Enter and exit submenus and select settings.
3. s
Scroll backwards in the menu.
Enter the AutoStb menu and navigate up to the desired auto standby
time, in this case 30 minutes. Then press select and navigate to the
exit menu point and press select again.
The new auto standby time setting has now been saved.
7. EXAMPLES OF OPERATION
MUTE
YOU PRESS
YOU SEE
Line 1
MENU
< EXIT
SETUP >
SELECT
< BACK
INPUTS >
BRIGHT >
LOGO >
V.INIT >
RESET >
AutoStb >
SELECT
OFF
30 Min
SELECT
AutoStb >
RESET >
V.INIT >
LOGO >
BRIGHT >
INPUTS >
< BACK
< EXIT
SELECT
Line 1
RD-101 Owner's manual | 37
Advertisement
Table of Contents
