Cleaning With The Hose And Tool - Bissell POWERCLEAN TURBOBRUSH PET XL Quick Start Manual

Cleaning with the Hose and Tool

Visit support.BISSELL.ca for helpful tips and tricks on using your machine's tools.
Tips Before Cleaning
• Check for colorfastness in an inconspicuous place before cleaning larger area.
• If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet.
• Vacuum thoroughly to pick up loose debris and pet hair.
• Check manufacturer's tag before cleaning. Do not use on velvet or silk.
• The Brush Roll remains on while cleaning with the hose and tool. Do not allow cleaner to sit in one
location for an extended period of time, as damage to floor can result.
1. 2.
Lift the Accessory Hose Insert the hose and snap
Door on top of Foot on the into place. Be sure the colored
front of the machine. The door hose release clip is facing out,
flips toward the machine to away from machine.
open.
4. 5.
Press the power button to Hold tool about 1 inch above
turn the machine ON. soiled surface. Press Spray
Trigger to apply cleaning
solution.
3.
Attach the tool to the end
of the hose.
6.
Release trigger, apply
downward pressure, and pull
toward you to suction up dirt
and cleaning solution. Do not
overwet.
BISSELL.ca 7