Filling The Clean Water Tank - Bissell POWERCLEAN TURBOBRUSH PET XL Quick Start Manual

Filling the Clean Water Tank

More of a video person? Head to support.BISSELL.ca for helpful how-to videos.
Note: Fill with warm (140°F/60°C MAX) tap water and add the appropriate BISSELL® formula. Do not
use boiling water. Do not heat water or tank in microwave.
1. 2.
The Clean Water Tank is on Lift the Clean Water Tank
the top of the machine. straight up to remove from the
machine.
4. 5.
Fill the Clean Water Tank Screw the cap back onto the
with water and formula. Clean Water Tank.
Cleaning Formula
Fill with hot tap water to the
Water Fill Line above DEEP
CLEAN. Add formula to the
Formula Fill Line above DEEP
CLEAN. If you're using a Boost
formula additive, add two
ounces to your tank.
3.
Unscrew the cap from the
Clean Water Tank.
6.
Align tank with grooves on
the machine. Slide tank down
into place.
BISSELL.ca 5