Assembly - ICON Health & Fitness PRO-FORM QUICKSTART 6.0 User Manual

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of
the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri-
cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
1. Make sure that the power cord is unplugged.
Press the Upright Knob (106) into the lower end
of the right Upright (104). Make sure that the
tabs on the Upright Knob snap into the holes in
the Upright Knob Plate (107).
2. Turn the Upright Knob (106) counterclockwise
until the Uprights (104) pivot freely. With the
help of a second person, raise the Uprights. If
the Uprights do not stop at the position shown,
the Upright Knob is too loose. Lower the
Uprights and turn the Upright Knob clockwise.
Then, raise the Uprights.
Turn the Upright Knob (106) clockwise to lock
the Uprights (104) in the vertical position.
1
2
6
104
107
106
Holes
104
106