Antennas
Removing the antennas
Prerequisites
1. Follow the procedure in
2. Remove the
left-side
cover.
3. Remove the top-cover.
4. Remove the
right-side
5. Remove the
single-graphics card
6. Remove the
wireless
card.
7. Remove the
front
bezel.
8. Remove the
top
bezel.
About this task
The following images indicate the location of the antennas and provides a visual representation of the removal procedure.
Steps
1. Remove the four screws (M3x4t) that secures the antennas to the top bezel.
2. Remove the antenna cables from the routing guides on the top bezel.
3. Lift the antenna off the top bezel.
Installing the antennas
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the antennas and provides a visual representation of the installation procedure.
Before working inside your
cover.
or
dual-graphics
computer.
card, as applicable.
81