Table of Contents
Advertisement
products, abrasive cleaning pads, solvents or
metal objects.
DISPOSAL
WARNING! Risk of injury or
suffocation.
INSTALLATION
UNPACKING
CAUTION! Before use all parts of the
transport packaging must be removed.
1
1
Open loading door.
2
Pull off adhesive strips from inside machine on top of drum.
3
Remove foil hose and polystyrene padding from the machine.
DOOR REVERSAL
To make it easier to load or unload the laundry, the
door can be reversed.
WARNING! The door must only be
reversed by an authorised service
engineer.
Please contact your Authorised Service Centre.
The engineer will carry out the door reversal at your
cost.
SPECIAL ACCESSORIES
•
stack kit
Available from your Authorised
Service Centre or your specialist
dealer
These intermediate installation kits can be used
to arrange the dryer and an washing machine
(60 cm wide, front loaded) as a space-saving
washer/dryer stack. The washing machine is at
the bottom and the dryer is at the top.
Read carefully the instructions supplied with the
kit.
2
•
Disconnect the appliance from the mains
supply.
•
Cut off the mains cable and discard it.
•
Remove the door catch to prevent children and
pets to get closed in the appliance.
3
•
drain kit
Available from your Authorised
Service Centre or your specialist
dealer
Installation kit for direct draining of condensate
into a basin, siphon, gully, etc. The condensate
tank then no longer has to be drained, it must
however remain in its intended position in the
machine.
Read carefully the instructions supplied with the
kit.
•
pedestal with the drawer
Available from your Authorised
Service Centre or your specialist
dealer
To situate the dryer in optimal high and have
some additional space to store (e.g. laundry).
Read carefully the instructions supplied with the
kit.
5
Advertisement
Table of Contents
