Table of Contents
Advertisement
Technical Specifications
Model
Load (Dry weight)
Spin Speed (rpm)
Power Supply
SD2801
4,0 Kg
2800
220-240 V/50 Hz
SD2802
4,0 Kg
2800
220-240 V/50 Hz
This appliance complies with E.E.C. directive No 87/308 of 2.6.87 relative to radio
interference suppression.
This appliance complies with the following E.E.C Directives:
73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subse¬
quent modifications.
92/31/EEC - EMC Directive
Installation
Before you use the appliance for the first
time, remove the cardboard inside the
drum of the spin dryer, and wipe the in¬
side of the drum with a damp cloth.
Electrical Connection
Warning: This appliance must be
earthed. The manufacturer declines to
accept any liability should this safety
measure not be observed.
For your convenience and safety your
new Zanussi spin dryer comes ready fit¬
ted with a moulded flex and plug. All you
have to do is push the plug into a 13 amp
power socket and switch on.
However, if for some reason you need to
replace this plug with one of your own
you will find the wires inside the flex are
colour-coded as follows:
Green & Yellow: Earth
Blue:
Neutral
Brown:
Live
Make sure you connect each wire to the
correct terminal inside the plug. The
plug's terminals may be colour coded in
the same way as the wires. If not, the
earth terminal will either be coloured
Green, marked with the symbol »■=■«, or
marked with the letter »E«. The neutral
terminal will either be coloured black, or
be marked with the letter »N«. The live
terminal will either be coloured red, or
be marked with the letter »L«.
Advertisement
Table of Contents
