Safety Information; Proper Use; Technical Data - Alpha tools PS 600 E Original Operating Instructions

Anleitung_PS_600_E_SPK7:_
GBR
Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage. Please
read the complete operating instructions and safety
regulations with due care. Keep this manual in a safe
place, so that the information is available at all times. If
you give the equipment to any other person, hand over
these operating instructions and safety regulations as
well. We cannot accept any liability for damage or
accidents which arise due to a failure to follow these
instructions and the safety instructions.

1. Safety information

Please refer to the booklet included in delivery for the
safety instructions.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations and
instructions may result in an electric shock, fire and/or
serious injury.
Keep all safety regulations and instructions in a safe
place for future use.
2. Layout and items supplied (Fig. 1/2)
2.1 Layout
1. Knurled screw for speed control
2. Locking button
3. ON/OFF switch
4. Allen key
5. Power cable
6. Adapter for dust extraction system
7. Adjustable soleplate
8. Selector switch for pendulum action
9. Dial scale for soleplate
10. Guide roller
11. Parallel stop
12. Saw blade
13. Locking screws for parallel stop
14. Blade holder
15. Safety guard
16. Screw for soleplate
3. Items supplied
Open the packaging and take out the equipment
with care.
Remove the packaging material and any packaging
and/or transportation braces (if available).
Check to see if all items are supplied.
Inspect the equipment and accessories for transport
12
26.08.2011 8:17 Uhr Seite 12
damage.
If possible, please keep the packaging until the end
of the guarantee period.
IMPORTANT
The equipment and packaging material are not toys.
Do not let children play with plastic bags, foils or
small parts. There is a danger of swallowing or
suffocating!
Electronic jigsaw
Allen key
Adapter for dust extraction system
Parallel stop
Original operating instructions
Safety instructions

3. Proper use

The jigsaw is designed for sawing wood, iron, non-
ferrous metals and plastics using the appropriate saw
blades.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in
commercial, trade or industrial businesses or for
equivalent purposes.

4. Technical data

Mains voltage:
Power input:
Stroke speed:
Stroke height:
Cutting depth, wood:
Cutting depth, plastic:
Cutting depth, iron:
Miter cut: up to 45° (left and right)
Protection class:
Weight:
230 V~ 50 Hz
600 W
-1
0 - 3000 min
18 mm
65 mm
20 mm
5 mm
II /
1.64 kg