AXIS Q6055-C PTZ Network Camera
Technical specifications
Technical specifications
You can find the latest version of the technical specifications at www.axis.com
LED Indicators
Status LED
Unlit
Green
Amber
Amber/Red
Media converter switch LED indicators
LED
Power
Network (4x)
Camera network
(only available on
AXIS T8607)
SD card slot
NOTICE
NO
NO
TICE
TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Disconnect power or
unmount the SD card from the Axis product's webpages before removal.
This product supports SD/SDHC/SDXC cards (not included).
For SD card recommendations, see www.axis.com
Buttons
Control Button
For location of the control button, see Hardware overview on page 7 .
The control button is used for:
•
Resetting the product to factory default settings. See page 60.
•
Connecting to an AXIS Video Hosting System service. See page 52. To connect, press and hold the button for about 3
seconds until the Status LED flashes green.
•
Connecting to AXIS Internet Dynamic DNS Service. See page 52. To connect, press and hold the button for about 3 seconds.
Indication
Connection and normal operation.
Shows steady green for 10 seconds for normal operation after startup completed.
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Flashes amber/red if network connection is unavailable or lost.
Indication
Color
Unlit
DC power unconnected or current protection engaged (power overload)
Green
DC power connected.
Amber
10 Mbit connection. Flashes during activity.
Green
100/1000 Mbit connection. Flashes during activity.
Green
100 Mbit connection. Flashes during activity.
65