Table of Contents
Advertisement
AXIS Q6045-S Mk II PTZ Dome Network Camera
Technical specifications
•
Connecting to AXIS Internet Dynamic DNS Service. See page 51. To connect, press and hold the button for about 3 seconds.
Connectors
Multiconnector
Terminal connector for connecting the supplied media converter switch, which provides the following signals:
•
DC Power
•
Network (Ethernet 10/100Base-T)
•
Input/Output (I/O)
Multicable connectors
Note
The supplied multicable is required in order to maintain the camera's NEMA/IP rating.
The multicable is connected to the camera's multiconnector, see Hardware overview on page 7 .
The wires are connected to the supplied media converter switch, see AXIS T8607 Media Converter Switch on page 8 .
The cable provides the following signals:
•
DC power to camera
•
Network (Ethernet 10/100Base-T)
•
Input/Output (I/O)
Multicable overview
1
Power wire (red)
2
Digital I/O wire (blue)
3
Ethernet wire (green/white)
4
Ethernet wire (green)
5
Ethernet wire (orange/white)
6
Ethernet wire (orange)
7
Digital I/O wire (yellow)
8
Ground wire (black)
9
Power wire (red)
10 Ethernet wire foil shield (2x)
11 Braided shield coil
65
Advertisement
Table of Contents
