Table of Contents
Advertisement
AXIS Q6045-S Mk II PTZ Dome Network Camera
Technical specifications
Technical specifications
To find the latest version of the datasheet, go to www.axis.com > product > Support & Documentation.
LED Indicators
Status LED
Unlit
Green
Amber
Amber/Red
Red
Media converter switch LED indicators
LED
Power
Network (4x)
Camera network
(only available on
AXIS T8607)
SD card slot
NOTICE
TICE
NO
NO
TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Disconnect power or
unmount the SD card from the product's webpage before removal.
This product supports SD/SDHC/SDXC cards (not included).
For SD card recommendations, see www.axis.com
Buttons
Control Button
For location of the control button, see Hardware overview on page 7 .
The control button is used for:
•
Resetting the product to factory default settings. See page 59.
•
Connecting to an AXIS Video Hosting System service. See page 51. To connect, press and hold the button for about 3
seconds until the Status LED flashes green.
Indication
Connection and normal operation.
Shows steady green for 10 seconds for normal operation after startup completed.
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Flashes amber/red if network connection is unavailable or lost.
Firmware upgrade failure.
Color
Indication
Unlit
DC power unconnected or current protection engaged (power overload)
Green
DC power connected.
Amber
10 Mbit connection. Flashes during activity.
Green
100/1000 Mbit connection. Flashes during activity.
Green
100 Mbit connection. Flashes during activity.
64
Advertisement
Table of Contents
