Table of Contents
Advertisement
Fuel Gauge
This gauge measures the amount of fuel in the fuel
tank(s).
Hydraulic-Fluid Temperature Light
If the hydraulic fluid gets too hot, this light illuminates
and an audible alarm sounds. If this happens, shut off
the engine and allow the traction unit to cool.
Specifications
Note:
Specifications and design are subject to
change without notice.
Traction Unit
Width
Length
Height
Weight
Operating capacity with
standard bucket
Tipping capacity with
standard bucket
Wheelbase
Dump height (with
standard bucket)
Reach—fully raised (with
standard bucket)
Height to hinge pin (with
standard bucket in highest
position)
Bucket
Width
Length
Height
Weight
Capacity
SAE struck capacity
Heaped capacity
Maximum load rating
Maximum Material Density at
Capacity
The density of the materials moved by the bucket
varies and, therefore, so does the amount of material
that the bucket can carry before reaching the
maximum load rating. The first 2 tables lists the
density of material that can be carried, both heaped
and struck (i.e., leveled off), in the bucket. The
Material Density table lists common materials and
their densities.
Bucket Capacity
Struck (leveled) bucket
Heaped bucket
Note: Maximum density = Maximum load rating / Capacity
13
86 cm (34 inches)
180 cm (71 inches)
117 cm (46 inches)
853 kg (1,880 lb)
227 kg (500 lb)
671 kg (1,480 lb)
79 cm (31 inches)
119 cm (47 inches)
55 cm (22 inches)
168 cm (66 inches)
88 cm (35 inches)
68 cm (27 inches)
64 cm (25 inches)
69 kg (153 lb)
0.10 m
3
(3.5 ft
3
)
0.12 m
3
(4.3 ft
3
)
234 kg (515 lb)
Maximum Density
2369 kg/m
3
(147 lb/ft
3
)
1937 kg/m
3
(121 lb/ft
3
)
Advertisement
Table of Contents
